Micropython on Adafruit Huzzah esp8266

Installation

• Download micropython firmware for esp8266

Go to http://micropython.org/download#esp8266 and download the stable firmware file of the board (for example: esp8266-20171101-v1.9.3.bin).

• Install esptool

We need to install esptool to flash the firmware from the computer to the esp8266 board. We use the python pip to install the esptool with the following command:

pip install esptool 

Or

python -m pip install esptool

• Using esptool to erase the flash on device

Once we install the esptool, we can use the esptool.py to erase the flash with the command:

esptool.py --port /dev/ttyUSB0 erase_flash

Or for Windows with com serial port: com + port number

esptool.py --port com4 erase_flash

• Flashing the firmware

Open command line terminal. Change to directory that we store the downloaded firmware. Execute the following:

esptool.py --port /dev/ttyUSB0 --baud 460800 write_flash --flash_size=detect 0 esp8266-20171101-v1.9.3.bin

Or on Windows using com serial port:

esptool.py --port com4 --baud 460800 write_flash --flash_size=detect 0 esp8266-20171101-v1.9.3.bin

Micropython REPL

• Using Putty on Windows
  1. Download and install Putty from: https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html
  2. Open putty.exe to start the program
  3. Click on Serial
  4. Enter Serial Line port (for example COM4)
  5. Change the Serial Speed to 115200. It is the default speed for micropython REPL
  6. Click Open

Note: to see which com port the device is on in windows. We can:

1. Connect the device via usb cable
2. Open device manager.
3. Click on Ports (COM & LPT)
4. The Device will be list with Name and port number

References

Getting started with MicroPython on the ESP8266: https://docs.micropython.org/en/latest/esp8266/esp8266/tutorial/intro.html