LoPy-nano-gateway-wan-public: Difference between revisions
Jump to navigation
Jump to search
(→LoPy) |
(→LoPy) |
||
Line 70: | Line 70: | ||
*Reset the LoPy | *Reset the LoPy | ||
After reset the LoPy we should see the gateway status in [https://console.thethingsnetwork.org/gateways Gateways Page] to connected | After reset the LoPy we should see the gateway status in [https://console.thethingsnetwork.org/gateways Gateways Page] to connected | ||
== References == | |||
These page follow example from: | |||
1. [https://forum.pycom.io/topic/810/new-firmware-release-1-6-7-b1-lorawan-nano-gateway-with-ttn-example LoPy-LoRaWan-Nano-Gateway] | |||
2. [https://www.thethingsnetwork.org/docs/gateways/registration.html The Things Network] |
Revision as of 14:56, 15 March 2017
LoPy nano gateway and Thethingsnetwork
In this page, We are going to:
- In Thethingsnetwork Server
- Setup Gateway
- Create Application
- Register Device
- In LoPy
- Update LoPy firmware to 1.6.7.b1
- Configure LoPy code to forward message to Thethingsnetwork Server
- Run LoPy Nano Gateway code
Thethingsnetwork Server
- Register Account
1. Go to TheThingsNetwork 2. Enter username, email and password 3. Click "Create Account" 4. Then Follow instruction to verify your email-address
- Setup Gateway
1. Go to TheThingsNetwork Console 2. Click on Gateway 3. Click "register gateway" 4. Select "package forwarder 5. Enter Gateway EUI (Note: To get Device EUI. Execute these code in LoPy. Reference) from network import LoRa import binascii lora = LoRa(mode=LoRa.LORAWAN) print(binascii.hexlify(lora.mac()).upper().decode('utf-8')) 6. Enter Description 7. Select Frequency Plan 8. Enter Location 9. Select Antenna Placment 10. Click Register Gateway
- Change Gateway Setting
1. Go to Gateways Page 2. Click on the gateway that just created. 3. Click "Setting" 4. In "Router" Field. Enter the following: router.eu.thethings.network:1700 (Note: We want to forward our package from LoPy Nano Gateway to "router.eu.thethings.network:1700" the other router may not work) 5. Click "Update Gateway"
- Create Application
- Register Node
LoPy
- Update firmware to 1.6.7.b1
1. Follow the official LoPy upgrade guide Firmware-Upgrade
- Download LoPy Nano Gateway Code
1. Go to LoPy Github 2. Download the file: main.py, config.py and nanogateway.py
- Change config.py configuration
1. Open and edit "config.py" file 2. Update GATEWAY_ID to Device EUI. WIFI_SSID to ssid of wireless access point. WIFI_PASS to password of wireless access point. 3. Save the file
- Upload main.py, config.py and nanogateway.py to "flash" directory of LoPy.
1. Via FTP: Follow this Pycom-Filesystem
- Reset the LoPy
After reset the LoPy we should see the gateway status in Gateways Page to connected
References
These page follow example from:
1. LoPy-LoRaWan-Nano-Gateway 2. The Things Network