FEDER:Lora Network Installation

From UNamur InfoSec
Revision as of 15:00, 3 March 2017 by Rthavymo (talk | contribs)
Jump to navigation Jump to search

We have installed a LoraWAN using raspberry pi 2 and IMST gateway (iC880A-USB). The loriot.io network service has been used in our experimentation. LoPy micro-controllers were used as end-devices in our test. We were able publishing data to Loriot.io by using LoPy board. Below are the step-by-step LoraWAN installation procedure.

I. Setting up the gateway 1. Make sure that the Raspberry Pi is connected to the internet and that you connected the IMST iC880A over USB. 2. Download of the Open Source Driver a. Install git client: sudo apt-get install git b. Create local folder: mkdir -p ~/LoRa/lora_gateway c. Clone the repository: cd ~/LoRa/lora_gateway git clone https://github.com/Lora-net/lora_gateway.git Note: Use lora_gateway 2.0.0, not the latest version. (Run git checkout v2.0.0 in the lora_gateway folder). cd lora_gateway git checkout v2.0.0

Retrieved from "https://doc.infosec.unamur.be/index.php?title=FEDER:Lora_Network_Installation&oldid=176"